Posts Tagged ‘Official Detail’

2013 Ford Shelby GT500 Official Detail

Wednesday, May 2nd, 2012
Ford Shelby GT500

Ford Shelby GT500

At 662 HP, 2013 Ford Shelby GT500 Certified As World’s Most Powerful V8! Segment-Leading Fuel Efficiency

The 5.8-liter supercharged V8 in the 2013 Ford Shelby GT500 is SAE certified at 662 horsepower and 631 lb.-ft. of torque

The world’s most powerful production V8 is backed up by chassis, aerodynamic and braking performance that makes the GT500 an outstanding all-around sports car
Even with 112 horsepower more than the 2012 GT500, fuel economy is increased by 1 mpg both city and highway, 5 mpg better than Chevrolet Camaro ZL1.

The all-new supercharged 5.8-liter powerplant in the 2013 Ford Shelby GT500 has been officially SAE-certified as the most powerful series production V8 in the world with peak output of 662 horsepower and 631 lb.-ft. of torque. That’s more power and torque than low volume sports cars costing tens or hundreds of thousands of dollars more than the GT500, which is the most fuel-efficient vehicle in its segment. In fact the 2013 GT500 is the most fuel-efficient car with over 550 horsepower in any segment available in America.

Unlike high-strung engines found in much more expensive exotic supercars, the GT500 engine generates its massive thrust throughout its operating range with 395 lb.-ft. of torque available just off idle at 1,000 rpm. More than 90 percent of the peak torque is available from 2,200 to 5,800 rpm so that no matter when you squeeze the go pedal, the GT500 will just get up and run.

The combination of the new TVS 2.3-liter supercharger, twin overhead camshafts and four valves per cylinder ensures this stallion can breathe all the way to 7,000 rpm with the peak power production coming at 6,500 rpm and holding fairly steady right to the rev limit.

“Our goal is to create outstanding all-around performance cars, not just stoplight-to-stoplight sprinters,” said Jamal Hameedi, SVT chief engineer. “We’ve backed up this amazing powerplant with a more refined chassis tuning that helps keep the rubber on the pavement without punishing the driver’s spine and six-pot Brembo brakes that dissipate speed with ease stop after stop.”

The broad, flat torque curve of the GT500 engine makes it tractable and easy to drive whether trolling along in traffic or powering out of a turn on a twisting country road. With more than enough grunt to push the coupe to 200 mph and beyond, the chassis has been tuned to absorb the road imperfections that can cause instability at high speeds. The revised front fascia and splitter help manage the flow of air around and under the GT500 so that it offers 33 percent more effective aero loading at 160 mph compared to the 2011 model and feels more firmly planted.

“The engineers at Ford SVT focused on the fundamentals first with solid mechanical grip and strong brakes,” added Hameedi. “On top of that platform they added advanced driver-adjustable electronic assist features including launch control, Bilstein adjustable damping, AdvanceTrac stability control and electric power-assisted steering.”

Even with the most powerful production V8 in the world, the 2013 Shelby GT500 improves on the fuel efficiency of the 2012 model with an EPA-estimated 15 mpg city, 24 mpg highway and 18 mpg combined with no gas guzzler tax. That’s 5 mpg better on the highway than the 2012 Chevrolet Camaro ZL1 even with an extra 82 horsepower and 75 lb.-ft. being generated under the hood. With the 2013 GT500 world-class performance no longer has to mean a world-class thirst for fuel.

The 2013 Ford Shelby GT500 will be built at AutoAlliance International Plant in Flat Rock, Mich

2013 Ford Shelby GT500

2013 Ford Shelby GT500

Ford Shelby GT500

Ford Shelby GT500

2013 Audi Q3 RS Concept Official Detail

Wednesday, April 18th, 2012
Audi Q3

Audi Q3

-Interpretation of a high-performance athlete with 265 kW (360 hp)
-Powerful 5-cylinder unit combines gasoline direct injection with turbocharging
-Acceleration to 100 km/h (62.14 mph) in 5.2 seconds and top speed of 265 km/h (164.66 mph)

At Auto China 2012 in Beijing, Audi is presenting a themed vehicle based on the Q3 – the RS Q3 concept. It interprets the character of the compact SUV in a very special way – systematically dynamic.

The blue painted Audi RS Q3 concept is a vehicle based on the theme of thrilling dynamic performance. Its engine, a 2.5 TFSI with 265 kW (360 hp) of power, and its body – lowered about 25 mm (0.98 inches) and widened with sharp visual details – explore the potential of the Q3 model series in a new way.

Brushed and polished aluminum trim frames the Audi RS Q3 concept’s single-frame radiator grille. Its black grille insert exhibits a new geometry – the honeycombs are slightly offset to one another deeper inside, creating a distinct three-dimensional effect. The lower area of the grille integrates another sculpted feature – a silver quattro signature. The headlights are slightly tinted; inside them, some chrome parts are dark or covered by panels of carbon fiber-reinforced polymer (CFRP).

The bumper was redesigned; there are now powerful edges around the outer air intakes. They are subdivided into two segments – the inner sections have honeycomb screen inserts, while their outer sections, made of CFRP, have a smooth funnel shape. The front spoiler is also made of CFRP. Its lower section is matt black. The entire lower section of the bumper is coated with blue clearcoat paint.

The same combination of black and blue tinted areas is repeated on the sides of the Audi RS Q3 concept – on the trim strips of the doors and sills and on the add-on parts of the wheel housings. The door mirror housings consist of black CFRP, while matt aluminum trim frames the side windows. The roof spoiler runs a long way towards the rear; its middle section has been slightly shortened compared to its outer sections. It is painted in the body color Ordos Blue – a matt blue with a slight yellow tint.

At the rear, the lower bumper section has a sporty and angular style. The diffuser insert, which integrates the two large elliptical tailpipes in typical RS look, has been shifted far upward. Here too, Audi designers chose a combination of blue clearcoat and black CFRP. The rear lights and auxiliary lights in the bumper are tinted in anthracite and are made of clear glass.

Blue and black: the interior
In the interior of the Audi RS Q3 concept, which gets plenty of light through a glass sunroof, cool black is the dominant color – on the roofliner, floor carpet, floor mats, leather-upholstered instrument panel and on large areas of the seat upholstery, which consists of Fine Nappa leather. Dark blue Alcantara is used as a contrasting element on the seat covers.

The contrasting blue color is used in an inventive way in the CFRP decorative panels – the panel material was produced by weaving brilliant blue luminescent glass fibers into it. The steering wheel has large control stalks made of CFRP, which are framed by aluminum accents. Most of the wheel is covered with black Velvet leather – a leather that gives the hands a secure grip and repels dirt very well. In the door trim panels, there are surfaces in blue Alcantara.

The inside door handle has a perforated lightweight construction look as in every RS model. In the tachometer, Chinese characters replace the usual Arabic numerals. RS Q3 badges adorn the instrument cluster, the seatbacks, door sill plates and floor mats.

The styling of the engine compartment is also extremely sporty in appearance. A layered-carbon trim panel covers the area around the five-cylinder engine that sports a red valve cover, and two laterally arranged ventilation screens feed air to the engine. As is the practice in car racing, the cylinder numbers are marked on their spark plug covers. An aluminum housing holds the open sports air filter, and the filtered air tube is made of stainless steel.

Powerful: the drivetrain
The extremely powerful 2.5 TFSI in the RS Q3 concept combines two classic Audi technologies – gasoline direct injection and turbocharging. From 2,480 cc of engine displacement, it generates 265 kW (360 hp) of power. The car catapults itself from zero to 100 km/h (62.14 mph) in 5.2 seconds, and its propulsive force takes it to a top speed of 265 km/h (164.66 mph).

A seven-speed S tronic transfers the forces of the sonorous 2.5 TFSI to the quattro permanent all-wheel drive. Generally, it directs these forces almost exclusively to the front wheels. When slip is detected there, it can redistribute forces to the rear axle via a hydraulic multi-plate clutch with electronic control – instantaneously and variably.

The alloy wheels of the Audi RS Q3 concept continue the dynamic RS Q styling and have the dimensions 8.5 J x 20. The front surfaces are high-gloss, while the sides are sandblasted. The tire size of 255/30 is not exactly typical for an SUV, but certainly for an RS model.

2013 Audi Q3 RS Concept

2013 Audi Q3 RS Concept

Audi Q3

Audi Q3

2013 Ford Flex Facelift Official Detail

Tuesday, November 8th, 2011
2012 Ford Flex

2012 Ford Flex

New Ford Flex Brings More Technology, Better Fuel Economy, Modern Sophistication to Seven-Passenger Crossover

The latest three-row, seven-passenger Ford Flex offers comfort and advanced technology in a distinctive package, including sleek new front end and modern interior
New Flex features the latest MyFord Touch® system, new safety and driver-aid features such as adaptive cruise control, Ford’s Blind Spot Information System (BLIS®) as well as push- button start, rear inflatable belts, rain-sensing wipers and active park assist
Under the hood, Flex is equipped with a standard 3.5-liter Ti-VCT V6 that delivers 20 more horsepower and projected 1 mpg better fuel economy, or the popular and fuel-efficient 3.5-liter EcoBoost® V6 engine

Fans of the Ford Flex have even more to love next year with an upgraded model with a sleek new look and even more technology to make driving safer, easier and more fuel-efficient.

“Flex appeals to people who want to stand out from the crowd and has the highest retention rate of any vehicle in the Ford lineup,” said Mark Fields, president of The Americas. “With technologies not found in other full-size utilities, even better fuel economy and a more modern, sophisticated look, we’re offering people even more reasons to choose Flex with the new model.”

The seven-passenger, three-row crossover – which debuts at the Los Angeles Auto Show this month – comes equipped with the new generation of MyFord Touch, rear inflatable belts, collision-avoidance technologies, rain-sensing wipers, keyless entry, first-row heated and cooled seats, power-fold mirrors and an optional new Appearance Package. Plus, the base 3.5-liter engine is projected to deliver 1 mpg better fuel economy on the highway and in the city, with 20 more horsepower.

Enhanced technology
The new Flex features SYNC® with the new generation of MyFord Touch®, making it easier to manage information, control features and adjust settings.

“We’ve listened to our customers and have improved what they love about MyFord Touch,” said Kenneth Williams, systems integration engineer. “In this upgrade, the screens have a cleaner, clearer display. The words on the screens are larger and easier to read, the pressable areas on the screen look more like buttons, and we have made the functions clearer for faster navigation.

“What separates MyFord Touch is that there are multiple ways for customers to manage and control what they want through voice commands, menus accessed through the steering wheel controls, touch screen, buttons or knobs – whatever they prefer.”

MyFord Touch includes two 4.2-inch screens in the instrument cluster and an eight-inch screen in the center stack. The feature pairs with the latest version of SYNC.

The base SYNC package includes:

Hands-free, voice-activated calling via a Bluetooth®-connected mobile phone or USB-connected digital music player
911 AssistTM, the automated emergency calling service that is free for the life of the vehicle
Vehicle Health Report, the on-demand diagnostic and maintenance information service
Enhanced safety and driver-aid technology
The new Flex is equipped with the automotive world’s first production rear inflatable belts to offer improved comfort and protection for rear seat passengers. Last month, this safety innovation was named a Breakthrough Product Award winner by Popular Mechanics, part of the magazine’s seventh annual Breakthrough Awards.

The advanced restraint system is designed to help reduce head, neck and chest injuries for rear seat passengers, often children and older passengers who can be more vulnerable to such injuries.

Advances in airbag inflation and safety belt construction methods have enabled Ford and its suppliers to develop inflatable seat belts that are designed to deploy over a vehicle occupant’s torso and shoulder in 40 milliseconds in the event of a crash.

The new second-row belts operate like traditional safety belts in everyday use and inflate when sensors indicate a collision event. Each belt’s tubular airbag inflates with cold compressed gas, which flows through a specially designed buckle from a cylinder housed below the seat.

The new Flex also boasts available radar-enabled adaptive cruise control (ACC) and collision warning with brake support and Blind Spot Information System (BLIS®) with cross-traffic alert. These technologies help drivers avoid potential accidents using radar to detect the relative position of other vehicles and warn the driver with a combination of visual and audio alerts.

The ACC technology uses advanced radar to scan for vehicles in front of Flex at 20 times per second. The sensor can detect vehicles up to 150 yards away and detect speed changes as small as ¼ mph. When the system is activated, it functions like normal cruise control with the exception of being able to slow down the car when vehicles in front are detected to be slowing down. When traffic has cleared, the vehicle resumes the set speed. Four distance settings accommodate a range of driving styles and road conditions. The driver can set distance, speed and the time gap between vehicles.

Fuel economy bolstered by engines, technologies
Under the hood, Flex’s new base engine delivers even more efficiency and performance with the addition of twin independent variable camshaft timing (Ti-VCT) to the 3.5-liter V6.

The upgraded 3.5-liter Ti-VCT V6 engine provides 285 horsepower – an approximate 20 horsepower increase from the previous engine – and 255 lb.-ft. of torque. The new Flex also is projected to deliver 1 mpg more fuel economy, with projected fuel economy of 18 mpg city and 25 mpg highway.

This efficient V6 allows precise, variable control of valve overlap, or the window of time in which both the intake and exhaust valves in an engine are open at the same time. By adjusting overlap continuously, the engine can operate at optimum settings for peak fuel economy or peak power output as conditions demand.

The popular 3.5-liter EcoBoost® V6 remains on the new Flex, bringing the fuel economy of V6 engines with all-wheel-drive capability and V8-like performance of 355 horsepower and 350 lb.-ft. of torque.

A key contributor to EcoBoost fuel efficiency is direct injection of gasoline. This system precisely delivers a fine mist of fuel directly into each cylinder for optimal performance, economy and emissions.

EcoBoost engines are fundamental to the Ford strategy of providing technologically advanced, high-output, smaller-displacement powertrains that deliver exceptional fuel economy and uncompromised performance for millions of drivers around the world. By 2013, more than 90 percent of Ford’s North American lineup will be available with EcoBoost technology. Ford holds more than 125 patents on its EcoBoost engine technology.

Both engines are mated to a six-speed SelectShift Automatic® transmission.

The SelectShift advanced gearbox offers the driver a choice between fully automatic operation and manual control. With SelectShift with EcoBoost, paddle shifters are integrated into the steering wheel spokes. Intuitive to operate, a squeeze back on either paddle will deliver an upshift, while a gentle push forward on either paddle will induce a matched-rev downshift. SelectShift won’t second-guess the driver with an override shift; manual control is truly manually controlled. The thumb shift is new for 2013 with the standard engine models.

Both engines also are made more efficient with EPAS (electric power-assisted steering). EPAS improves fuel economy approximately 4 percent and reduces emissions while improving steering performance primarily because the steering system is powered by an electric motor connected to the vehicle’s battery, instead of engine-mounted hydraulic pump steering systems.

In addition, the new Flex’s battery management system operates the vehicle’s power supply system in a more economical manner to save fuel. The system:

Allows the alternator and system voltage to be controlled based on battery condition, vehicle operating state and electrical load status
Provides feedback to the vehicle regarding battery condition for active load management and battery diagnostics
Monitors battery temperature (higher voltage in lower temperatures, lower voltage in higher temperatures), extending the battery life
Fresh new look, touches – inside and out
Flex’s new front end rounds out the previously boxy edges, creating more visual harmony between the front and the rest of the vehicle. The signature Ford blue oval has been removed from the front, which now solely bears the Flex badge.
In the rear, Flex now has standard dual exhaust and available rear appliqué.

Inside the Flex customers will find a modern, sophisticated driver zone with new clusters, steering wheel and electronic finish panels, as well as new seat trim and foam.

Class-exclusives include the available second-row refrigerated console and the latest generation of MyFord Touch with SYNC.

Appearance Package and paint, wheel choices
Also new is an Appearance Package on Limited and SEL models that includes an available two-tone roof and mirrors, 20-inch machined aluminum wheels with painted pockets, leather seats, unique door trim panels and other interior upgrades for a truly distinctive, premium look and feel.

The new Flex comes in nine exterior colors, including three new colors for the 2013 model year: Ruby Red, Deep Impact Blue and Kodiak Brown. Customers also can choose from body-color roofs, or two-tone with white, gray or black available on the Appearance Package.

Six wheel styles are available for Flex as well.

Production
The Ford Flex is built at Oakville Assembly Complex in Ontario, Canada.

2013 Ford Flex Facelift

2013 Ford Flex Facelift

2012 Ford Flex

2012 Ford Flex